The Weather Box
These pictures show Pumptron in its Weather Box attached next to a mains switch box. In the picture on the right, observe that Pumptron is fixed to the back wall. The weather box opens by pulling the roof forward; by leaving the front screws on, they serve as hinges. This new model makes installation much easier and quicker than the previous one.
The weather box is a sealed unit to protect Pumptron from the weather, insects and crawling creatures. Whenever the unit is installed exposed to climate the weather box must be used.
The weather box contains a special bracket to support Pumptron in position. It also has the fittings for a FAN if required.
Pumps consuming less than 20 Amps do not need the FAN.